Browse Category

Building activity

How to Choose the Right Industrial Cleaning Solvent

How to Choose the Right Industrial Cleaning Solvent

You can get a variety of industrial cleaning medium for industrial degreaser- organic, petroleum or specialty solvents. The type of solvent you need depends on a lot of factors will we will discuss in our post.

Before going over to the main considerations, we will cover three key points to begin with. It is better if your solvent is-

  • Effective with proven results of performance
  • Non-hazardous and can be reused and recycled
  • Ensures the safety of your workers and their health

Keeping the above in mind go through the following tips to choose the right metal degreaser solution from standardindustrial for your industrial cleaning.

Consider your Cleaning Requirements

Your choice of solvent depends on how and what your cleaning requirements are. If you are going to clean gross contaminants like rail or road debris, then you can also go for biodegradable detergents and aqueous materials.

But if you need to get lubricants or grime off your parts then an industrial degreaser from using chlorinated or modified alcohol based solvent becomes important.

Review the Volatile Organic Content (VOC)

VOC based solvents come under various state and national regulations for their storage, usage, reporting and management. Be sure to review the VOC requirements before you buy and start using any metal degreaser solvent.

You can go for Geiss non-chlorinated solvents made of AIII hydrocarbons and modified alcohols. The solvent is not under the VOC standard and regulations as they have a low environmental impact. You can still get a satisfactory cleaning though the deterging power of such solvents may be lower than chlorinated solvents.

In that case you can use modified alcohols based solvents which are as strong as chlorinated solvents.

Look Out for the Flashpoint

Flashpoint is the lowest temperature at which a solvent produces enough vapour and becomes flammable when exposed to fire. So solvents with lower flashpoints have greater chances of igniting and causing fire hazards.

Solvents which have higher flashpoints are safer but they come with a compromise- you get lower cleaning capacity which takes up a long time.

You have to strike a balance between your cleaning requirements and the flashpoint. But solvents with flashpoints of 141 to 160 degrees are considered safe in most regions.

What to do if you have to use Hazardous Solvents?

If your cleaning needs and industrial degreaser have to use a solvent which has potential hazards, then use a reliable industrial washer to prevent any hazard.

For example, the Firbimatic Solvent systems are hermetically sealed and use a closed-circuit industrial cleaning process. This minimizes any chances of solvent vapour leakage and keeps your employees safe from inhalation and exposure risks.

Also, go for solvents which use precautions to reduce leakage mishaps. Geiss solvents come in closed loop transfer systems with a proprietary secure transfer system. You can also depend on Geiss for waste stream removal which ensures proper management of solvent waste.

Always go for environment friendly and non-toxic solvents if they are suitable for your purpose. If you end up using chlorinated based solvents, make sure you provide a safe working environment with proper resources.


BIM and construction management

Quality in construction is the need of the hour as some think that construction industry is doomed. Lacking techniques will not only make the process tough but will also lead to improper construction that could lead to issues. BIM consulting is the only way to make sure that the work is done in line with the requirements of the modern standards. It will also ensure that the quality improves and the leading professionals in the industry collaborate. The management of the process is not only easy because of the BIM but will also get the results which traditional construction techniques can’t. The BIM also integrates into the preexisting model of the construction software being used. Increase in usability and ensuring state of the art results are other assurances which BIM provides.

Design planning and further improvements are only possible if BIM is used as a part of the process. The making of any structure in this current era of advanced science and technology is not possible without BIM. The tools which BIM can integrate make the process hassle free and in line with the requirements of others. The building information modeling is a phenomenon and therefore it is very important that this idea is taken forward to create a structure that is reliable and quality embedded. The making of the building nowadays heavily depends on the fact that BIM is used. The large construction companies of Dubai and the Middle East always make use of this technology. The fact is that construction has never been as easy as it is with this program.

Thinking beyond design

The BIM tools are integrated into the software structure to make sure that the best outcome is provided to the clients. The management of the tools and techniques which are used by BIM are phenomenal and they always provide the best results. The design is not the only concern of the BIM but making a stable structure definitely is. The process which is related to the construction is managed effectively and therefore it means a lot to the business. The overall integration of the project is very easy and therefore the BIM is highly recommended to all businesses.

Not quantity but quality

This is a phenomenon for which BIM is known and therefore it means that the quantity is not the only concern of BIM. The fact of the matter is that the companies that are quality conscious should always use BIM. The companies that are quantity conscious should only use preexisting software program as it is the only way they can help. The construction has been made easy and reliable and kudos to BIM software program.

Operational and facilities management

The powerful tools which are available with the BIM say it all for the program as it can lead to the successful and interactive environment. The BIM also facilitates the day to functions and ensure that the work is being performed as per site parameters. It is important that the management of the BIM is closely monitored and altered where necessary to improve the productivity.